2021-12-08 10:50:49
Cell Mill Machine for Carbide Resin is an industrial equipment. With the development of society and the needs of people's lives, the demand for various fine powder is increasingly demanding requirements for various fine powder. It is also increasingly high, and the application of the classifier is also more extensive.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
ALPA Chargonal Powder Cell Mill Machine For Carbide Resin Experiment: A mining company needs to be sorted by Xialuden powder. Through the experiment of our ALPA can do product particle size: D90: 16.8μm, Yield: 246kg / h 加量
Welcome to the majority of major manufacturers in Xixia stone grading to the factory to visit, and collective experiments.
Today, let's take a look at how the Cell Mill Machine for Carbide Resin is maintained.
First, the air blower
1. Because the blades in the fan are particularly easy to accumulate, so they must clean the dust in the fan every week.
2, add the bearing box once a month.
3, if there is an abnormality in the fan, it is necessary to stop the ultrafine gas flow classifier for inspection.
Second, the host
1, you should check the graded impeller, spiral feeder, smash nozzle each year, see if there is wear, whether there is a place to replace.
2, running to a certain time, in order not to affect the use of ultrafine gas flow grading machine, some parts must be cleaned.
3, the bearing should make the right amount of lubrication, which will make the temperature abnormally.
Third, the planet waste valve
1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately.
2, the impeller and the body are cleaned every three months.
3, plus lubricants should also have every three.
Shandong AlPa is a source manufacturer specializing in Cell Mill Machine for Carbide Resin. All the year round provides equipment for domestic and foreign customers. Welcome to inquire!
