Cell Mill Machine Of Titanium

Cell Mill Machine Of Titanium is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is increasingly demanding various fine powder, and the requirements, purity and pass rate requirements are also It is increasingly high, and the application of classification machine is also more extensive.

A Cell Mill Machine Of Titanium costs, if you want to use Cell Mill Machine of Titanium for a long time, please pay attention to the following:

1. In the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Cell Mill Machine Of Titanium's host and grade score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seventeen introduction to the daily maintenance of Cell Mill Machine of Titanium.


ALPA desulfurizer Cell Mill Machine of Titanium case Sharing: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of powder equipment manufacturers at home and abroad. Finally, we chose our AlPa Cell Mill Machine of Titanium.
Technical parameters:
Finished particle size: 200 mesh 90% passed
Production capacity: 4-5T

Cell Mill Machine Of TitaniumObservation:
1, feed back irrigation: Improper tunnel adjustment, pipeline blockage, screen blocked, dust bag gas permeability or severe wear, hammer wear is serious, etc. can cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.

We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

Today, Cell Mill Machine Of Titanium is introduced to you, you want to know more information, please continue to pay attention to our website.