Rod Pin Pulverizer for Magnesia Aluminum Spinel

Rod Pin Pulverizer for Magnesia Aluminum Spinel is one of the common ultrafine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, with product particle size, particle size distribution Narrow, smooth surface surface, particle rules, high purity, high activity.

Rod Pin Pulverizer for Magnesia Aluminum Spinel will rise during work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
ALPA Battery Rod Pin Pulverizer for Magnesia Aluminum Spinel Case Sharing:

A energy company is a battery positive material production enterprise, with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc. The top of the list.

Case parameters:
Product particle size: D50: 15μm
Hour Yield: 300kg

In general, there are some sounds in operation. Rod Pin Pulverizer for Magnesia Aluminum Spinel will definitely have broken sounds during crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.

Shan dong alpa is a variety of gas flow crushers, combining development,Technology private enterprises in manufacturing and application use.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.