Hammer Pulverizer of Potassium Carbonate

There are many people who know Hammer Pulverizer of Potassium Carbonate, crusher technology is leading in the same industry.

Hammer Pulverizer of Potassium Carbonate has generally replaced the traditional mechanical pulverizer in real production, and its characteristics are:

1. Simple structure, demolition Simple, convenient, easy, just one person can complete the operation, disassembly and packing.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Hammer Pulverizer of Potassium Carbonate causes the finished product to purity, no impurities, non-pollutant materials due to its pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is the application of Hammer Pulverizer of Potassium Carbonate in the industry for you.


ALPA Water Available Feni50hammer Pulverizer of Potassium Carbonate Case Sharing: This customer needs a device that can make ultrafine pulverized metal powder. Finally, we purchased our AlPA CSM710-V mechanical grinder.
Technical parameters:
Production capacity: 200-250kg

During the production process, the temperature rise of the bearing must often be checked, and when the temperature rise exceeds 50 ° C, it should be closed, check The reason is that the fault is excluded. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA is a dedicated toIn the manufacturer of powder classifying machines, precision grading machines, laboratory grade machines, we have years of production experience in the production of products, and we have achieved a lot of important breakthroughs in many mechanical products.I believe that it will be the primary choice for your product purchase.