Ring Roller Mill Machine Of Lead-Tin Alloy

At present, Ring Roller Mill Machine Of Lead-Tin Alloy has gradually entered people's lives, more and more plants, and companies are using the equipment.

RING ROLLER MILL MACHINE OF LEAD-TIN Alloy provides power by the adiabatic expansion of the compressed air and the compressed gas in the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.
ALPA pea protein Ring Roller Mill Machine of Lead-Tin Alloy Case Sharing: This customer is a food company in Russia. After looking for a lot of powder equipment companies, it did not find a suitable device. It has been influenced by the company's production and operation, and finally I saw the ultra-smash of the pea protein before our website. Finally, through the incoming experiment, I finally determined the Ring Roller Mill Machine of Lead-Tin Alloy purchased our company.
Technical parameters:
Finished granularity: 400 mesh

Production capacity: 1.5T

How to continue RING ROLLER MILL MACHINE OF LEAD-TIN Alloy life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises above 50 ° C, check, find out the cause, troubleshoot.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.

3, regular inspections for the lids, promptly guarantee the quality of production and production.

4, the blades and bushing should always check the wear situation.When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours.The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease.Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.

If there is related requirements, please call us!