Turbo Pulverizer for Secondary Graphite

Turbo Pulverizer for Secondary Graphite is well balanced, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage in the pulverization process, which is favored by the powder industry.

High-temperature Turbo Pulverizer for Secondary Graphite's performance characteristics:
1
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

ALPA cobaltate Turbo Pulverizer for Secondary Graphite case Sharing: Beijing Lithium Electric Materials Company purchased a Turbo Pulverizer for Secondary Graphite from our Alpa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. For the company's unique needs, our ALPA engineers have finally customized a Turbo Pulverizer for Secondary Graphite for targeted. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.
Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250 kg of lithium cobalt acid lithium large particles: 500kg ternary: 500kg

In the production process, we should pay attention to maintenance and maintenance of Turbo Pulverizer for Secondary Graphite.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time, ensuring production quality and production.
4, shouldRegularly check the wear of the blade and lining. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

Users who need to purchase Turbo Pulverizer for Secondary Graphite products can choose Shan Dong Alpa. This is a manufacturer specializing in the production and sales of all kinds of eddy current crushers, affordable, after-sales service.