Hammer Mill Machine for Carbon Black

In this economically booming area, there are many people who know the airflow pulverizer, Hammer Mill Machine For Carbon Black technology is in a leading position in the same industry.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Hammer Mill Machine for Carbon Black generates a Juromon's cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting points and thermal materials. Hammer Mill Machine for Carbon Black The gas-resistant ratio is an important technical parameter and an important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.

When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

A lithium-electric material company main product is \"lithium electrode material\", the most important component of the lithium ion battery includes an electrolyte, isolation material, Positive electrode material, negative electrode material, housing, etc. High-end lithium battery sector for safe longevity life performance.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg

1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.