Turbo pulverizer for copper oxide

Turbo Pulverizer for Copper Oxide is one of the common ultra-fine pulverization methods, widely used in non-metallic mine, pharmaceutical, chemical, metallurgical and other industrial materials, ultra-fine pulverization or fine pulverization, with product particle size, narrow particle size distribution, The surface of the particles is smooth, the particle rules, high purity, and high activity.

Turbo Pulverizer for Copper Oxide is a comminuted machinery for synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed, such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus generated high-frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized.

The pulverizer is almost no increase in the temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean and maintenance. General shells use water cooling and their own air volume, conveying crushing materials, improves temperature, and reduces thermal materials.

The wear of the blade is caused by the vibration of a large number of ultrasonic eddy currents and high frequency pressures generated by the blade. Compact, no dust, no dust.

ALPA calcium carbonate uses Turbo Pulverizer for Copper Oxide case sharing: This customer is a stone powder company, mainly engaged in production and processing of calcium carbonate, magnesium oxide and other products, the company needs to perform calcium carbonate ultrafi powder Selection, grade the product of the required granular segment. After the experiment, as well as the production requirements, our AlPA's host can reach the company's needs, and finally purchased a plurality of graded units of our company.

Welcomes the major calcium carbonate flour manufacturers with powder grading to factory to visit and incurred.

Ultra-micro Turbo Pulverizer for Copper Oxide Inspection Work:

1 Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.

2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check the solenoid valve blownNo, it is necessary to force, adjust the dust collector solenoid width and spray interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment.After all of the above tests are normal, prepare the material production.


For more consultation, please continue to pay attention to us, or inquire.