Pin Pulverizer for Feni

Many friends who want to produce industrialized must be unfamiliar with the equipment of PIN Pulverizer for Feni. Pin Pulverizer for Feni has a very convenient, crushing speed, crushing product quality, is a very useful crushing machine.

When the Pin Pulverizer for Feni screen material, under the pressure of the rotating duct, the screen has good commonity. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.
The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

ALPA Baby Pin Pulverizer for Feni Case Sharing: The company is a chemical enterprise, it is necessary to make ultrafish smashing in small soda, investigate a number of powder equipment companies, and finally chose our alpa Pin Pulverizer for Feni. .

Technical parameters:
finished particle size: D97: 20UM
Production capacity: 10-220kg

1. Ensure smash The quality of the machine grinding dish is not harmful: the real-time monitoring system is carried out on the friction disk that is replaced, and the harm to the intake system is immediately observed.

2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand The oil pipe, the temperature difference is small, almost not, can be seen that the single cooling tower effect is not obvious, the heat exchange time of the cooling circulating water and the grease is too short, and the cooling tower is connected in series, and the cooling tower is refrigerated. Extend heat exchange time.

Shandong Alpa is a PIN Pulverizer forFENI equipment research and development 20 years experience manufacturing enterprise, has a number of patents, welcome to inquire!