Hammer Pulverizer of Pitch Coke

With the development of society, the application of Hammer Pulverizer of Pitch Coke has become more large.

Hammer Pulverizer of Pitch Coke is a comminuted device that is widely used in the current phase, which has a very good fineness in production, which can be finely pulverized silicon carbide, metal , Ore and other substances, and can also perform the production of ceramics, medicine, and biochemical products with high purity requirements.

ALPA Composites Hammer Pulverizer Of Pitch Coke Case Sharing: This customer is a cement manufacturer, wants to grade cement filler composite powder, select the composite powder of the appropriate particle size, thus enhance cement performance. Investigate the domestic powder equipment manufacturer, and finally chose our AlPA classifier to achieve the pursuit of large capacity, and ensure the particle size of the powder.

Case parameters:
Powder particle size: D50: 6.8μm
Hour Yield: 25T
For powder production companies, customized production, non-standard customized products are an advantage . The demand for each company is different. Therefore, the non-standard custom of powder equipment has gave birth to the powder equipment, and the ALPA of Shandong is a powder equipment non-standard custom enterprise. Our crushing equipment customized for Taiwan companies is a good case. Enterprises that have powder equipment customization needs to contact us.

Hammer Pulverizer of Pitch Coke's daily maintenance

1, during production, the temperature rise of the bearing must be checked, and when the temperature rise exceeds 50 ° C, it should be stopped, and the reason is to rule out the failure. .
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Users who want to view crusher related information can also log in to our website directly!