Hammer mill Machine of Tailings

In the classification operation of industrial production at this stage, the use of Hammer Mill Machine of Tailings is mainly targeted for the effective crushing of solid particles, and is the case where we are more commonly used in the ultrafine pulverization process.

Hammer Mill Machine of Tailings is a set of grading systems, grading machines and cyclone separators, dust collectors, and vents. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

ALPA Quarten, Silicon Powder Hammer Mill Machine of Tailings Case Sharing:

A new material company mainly engaged in new materials technology development, consulting services, silicon micron powder processing and quartz product sales. We have always provided customers with good products and technical support, improve after-sales service;

case parameters:
Product particle size: D99: 5.5UM D100: 10UM
Hour Yield: 200-700KG
[123 ] Ultra-micro Hammer Mill Machine of Tailings Pre-commissioning:
1, newly installed equipment, it is inevitably residual iron block, welding head, welding slag, etc. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.

2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.

3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. superiorAfter checking everything is normal, prepare the production of material.


If you have something about other crushers, you want to know, welcome to consult!