Cell Mill Machine for Carbon Nanotubes

Cell Mill Machine for Carbon Nanotubes determines the characteristics of a wide range of applications and high finished products, and is widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, food, Health products, new materials and other industries.

Cell Mill Machine for Carbon Nanotubes is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust phenomenon. .

How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.



ALPA Trimeticate Lithium Cells Cell Mill Machine for Carbon Nanotubes Share:
A new energy technology company is a professional company for new energy vehicles with lithium-ion power batteries, storage High-tech enterprises that can use lithium-ion batteries and key materials for key materials of lithium ion batteries, take the lead in achieving power battery companies in large-capacity manganese lithium-ion battery scale production and marketization applications.

Case parameters:

Product particle size: D50: 3-25UM
Hour Yield: 3-10kg

In general, there are some sounds in operation. Cell Mill Machine for Carbon Nanotubes will definitely have broken sounds when crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.
1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.

3. Install the muffler on the fireplace of the pulverizer.
4Damping equipment, such as using damping boards.


Shan Dong Alpa is committed to Cell Mill Machine for Carbon Nanotubes, has a mature process, strong technical strength, specializing in crusher research and development, survive by quality, welcome everyone to consult.