Turbo Pulverizer for Copper OxaLate

Most of the product production and processing in the current stage use Turbo Pulverizer for Copper oxalate to make products for product, one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Turbo Pulverizer for Copper OxaLate includes drive motor, pulverizing wheel, fine powder and coarse powder exit, raw material inlet and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.

Alpa Aluminum Silicate Turbo Pulverizer for Copper Oxalate Experiment: A environmental protection technology company needs to classify aluminum ultrafine powder for aluminum silicate due to production demand, because uncertain demand can not be achieved, so it is subject to experiment, By experimenting our ALPA air grade machine equipment can be graded, and finally the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h Add the amount.
Welcome major There is a powder grading demand manufacturer, to the factory visit, incoming experiments.

The privacy of the life and quality of Turbo Pulverizer for Copper Oxalate has the following:
1. Material properties.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.

The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.