Rod Pin Mill Machine of Rehmannia

Rod Pin Mill Machine of Rehmannia is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

With the increasing social needs, Rod Pin Mill Machine of Rehmannia's use performance, product quality, etc. are facing huge challenges. Therefore, ALPA Technology Co., Ltd. persisted, continuously improved the ultrafine pulverization strength, particle size distribution, particle crystal form, etc. to achieve more production.

ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultrafine pulverizer, to achieve good particle size, dispersion, unique and potential performance, improve powder crusher competitiveness, and realize the environment Protection and low power performance.

ALPA Battery Rod Pin Mill Machine of Rehmannia Case Sharing:

A new energy company is a high-tech enterprise specializing in research and development, production and sales of new energy materials. The company is committed to new energy materials. And innovation, the company's products include the special tetracantoxide of lithium battery, magnetic material tetraside and lithium battery positive electrode material manganese acid.

The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters
Product particle size: D50: 15μm
hour yield: 600kg

Rod Pin Mill Machine of Rehmannia Job Safety Application Basic Requirements

1, when crusher homework, operator It should stand in the direction of the hammer rotation, and if you don't wear your gloves, your hand must exceed the safety line, not allowed to use the iron and sticks instead of his feeding.

2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Power machine and pulverizerWhether or not lubrication is good.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.


Today, Rod Pin Mill Machine of Rehmannia is introduced to you, you want to know more information, please continue to pay attention to our website.