Impact Mill Machine for Silicon Carbon Anode

Most of the product production and processing in the current stage uses Impact Mill Machine for Silicon Carbon Anode, the product, is one of the very common ways of processing, with the continuous improvement of scientific productivity, grading equipment The technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

For Impact Mill Machine for Silicon Carbon Anode's service life, it is necessary to keep in mind using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Impact Mill Machine for Silicon Carbon Anode is cleaned promptly after use. Keep the internal cleaning of the Impact Mill Machine for Silicon Carbon ANode, avoiding oxidation of the material and the inner contact.


AlPa Hardstone Powder Impact Mill Machine for Silicon Carbon Anode Case Sharing:
A gypsum company is an integral of stone cream mining, calcium sulfate powder, production, sales, exports Industrialized enterprises, company products are widely used in building materials, molds, food, medicine, rubber, plastics, coatings and other industries.
The company adopts advanced modern production equipment and leading production technology, natural gypsum, natural plaster powder, desulfurized gypsum powder variety, high grade, quality, and export to all parts of the country, partially exported to Japan, South Korea, South Africa , Egypt and other countries are favored by users.

Product particle size: 4-15UM
Hour Yield: 3-6T

Impact Mill Machine for Silicon Carbon Anode should maintain and maintain
1, before use, first Checking all standard parts of the device not tightening, the belt is tight.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.

4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.


ALPA powder is dedicated to the development, production and sales of ultrafine powder and graded equipment, support according to demand, equipment model, reliable quality, high efficiency, low energy consumption, easy operation, priceReasonable, can consult 24 hours!