Pin Pulverizer for Cobalt Powder

In this economically booming area, there are many people who know Pin Pulverizer for Cobalt Powder, crusher technology is in a leading position in the same industry.

Pin Pulverizer for Cobalt Powder components include drive motors, pulveration wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.

ALPA Battery Powder Pin Pulverizer for Cobalt Powder Case Sharing:
A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resource re-production new technology and industries, Bioengineering and organic polymer materials, electronic products and network products technology development, technology transfer, technical training; manufacturing, sales and development products and related materials and equipment; international technical cooperation and related fields trade, technical personnel training; business capital Export business of enterprise self-produced products and technology and the import and export business of mechanical equipment, spare parts, raw materials and technologies required for this company.
Case parameters: D50: 5.8UM
Hour Yield: 800kg

1, when the crusher works, operation The person should stand in the direction of the cutting line of the hammer, and if you don't wear your gloves, your hands must exceed the security line, not allowing iron and sticks instead of hair.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking, not long-term oversight.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Shandong AlPa is a source manufacturer of PIN Pulverizer for Cobalt Powder, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!