Pin Pulverizer for Tea Powder

Pin Pulverizer for Tea Powder is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

PIN Pulverizer for Tea Powder's advantage, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement replacement. PIN Pulverizer for Tea Powder compressed air is dried, and the material is repeatedly collided, friction and shear in the intersection of the multi-shaped high pressure airflow. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. Pin Pulverizer for Tea Powder processes the speed of 20m / s high-speed hair dryer, which affects other high-speed sports. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

ALPA precipitation method White Carbon Black PIN Pulverizer for Tea Powder case share: This customer is an Egyptian company, learned from our English official website to ultrafine pulverization experience of white carbon black black. There are a number of cooperative customers. Through the incoming experiment and on-site visit. Determined our AlPA strength, and finally purchased the Pin Pulverizer for Tea Powder from our company.

PIN Pulverizer for Tea Powder Temperature High Temperature Solution

1. Ensure that the quality of the crushed machine grinding disc is not harmful: the real-time monitoring system is carried out on the friction disk that is replaced, and immediately obey the grinding The tray is harmful to the intake system.
2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand Oil pipe, find temperature differenceSmall, almost not, it can be seen that the temperature of the single cooling tower is not obvious, the heat exchange time of the cooling circulating water and the grease is too short, and the cooling tower is connected in series, and the double cooling tower is refrigerated, and the heat exchange time is extended..

The company has consistently follows the standard management, puts quality in the first production and service policy, providing customers with confidence and weighing airflow crusher products and services.